Performing Initial Setup. Inital setup must be done over the command line interface (CLI). Login on the system by the default admin and password. [admin@Mikrotik] > interface ethernet print Flags: X - disabled, R - running, S - slave # NAME MTU MAC-ADDRESS ARP 0 R ether2 1500 00:00:00:00:00. May 22, 2018 - This is a brief guide on how to implement an L2TP/IPSec VPN server on Mikrotik RouterOS and use it as a gateway. To set up SaferVPN on Mikrotik router using L2TP settings, follow our step by step guide detailed below: L2TP setup on Mikrotik router • Log into the Mikrotik router, using the standard username “admin”, with a blank password. • Then click on the PPP tab on the left-side menu. This will open the Interface tab. • Now click on the + sign and select L2TP Client. L2 MTU: Blank. Max MTU: Leave it as default, i.e., 1450. Max MRU: Leave it as default, i.e., 1450. • Now click on the Dial Out tab, and follow the steps given below: Connect To: Choose any server IP or hostname from one of the SaferVPN servers. Please refer. User: Your SaferVPN Username. Password: Your L2TP SaferVPN password. Profile: Default-encryption. Keepalive Timeout: 60 Allow: Keep all authentication methods checked. • Click on OK after verifying all the inputs. • Go to the IP tab on the left-side bar and select Firewall. Then click on the NAT tab and then click on + sign, as shown below: • Then you will see the General settings, follow the steps as given below: Chain: Select srcnat from the drop down menu. Out Interface: Select the name of the SaferVPN L2TP connection you have just created. • Select the Action tab and choose Masquerade from the drop down menu. • • Once you're back to the Firewall window, click on the Mangle tab and then click on the + sign: • In the New Mangle Rule window, go to the General tab and follow the steps below: Chain: Select Prerouting from the drop-down menu. Address: Here you need to enter the IP range that you want to have routed through the VPN connection. For ex:- 192.168.5.150- 192.168.5.250 ( assuming the router is 192.168.5.5) Click OK after verifying the inputs. Draver modem huawei hilink telkomsel flas. • On the same window click on the Action tab and edit the following settings: Action: Select mark routing from the drop-down menu. New Routing Mark: In this field enter any name from the routing mark, for ex- L2TP Passthrough: Activated Click on OK after verifying the inputs. • Now click on IP on the left side of the menu. This will open the Router List window, click on Routers and then click on the sign. In the new window, on the General tab edit the following settings: Dst. Address: This should be 0.0.0.0/0 Gateway: Here you need to enter the name of the VPN connection that you have created, for ex- SaferVPN L2TP from the drop-down menu. Routing Mask: Select L2TP from the drop-down menu. Click on OK after verifying all the inputs. ![]() • Adjust the DNS settings. Download instagram apk for blackberry z3 download. Go to the IP in the left side of the menu and click on DNS. • Select Static and then click on the + sign. A new window will open. • Edit the settings as shown below: Name: OpenDNS Address: 208.67.222.222 Click on OK after verifying the inputs. • Again, click on the sign, but enter the following name in the Name field. Name: OpenDNS1 Address: 208.67.220.220 Click on OK after verifying the inputs. • Once Again click on the sign, and fill the input fields as shown below: Name: Google Address: 8.8.8.8 Click on OK after verifying the inputs.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |